Flecks + Specks Dino Egg colored grog

Flecks + Specks Dino Egg colored grog creates colorful pastel specks after firing, adding bold texture and a softly speckled effect to ceramic surfaces.

Flecks + Specks Dino Egg is a colored grog featuring a lively mix of pastel shades. When added to a clay body, it creates multicolored specks with a playful, slightly nostalgic character. The size and intensity of the specks depend on the selected grain size and the amount of grog used. It brings plain clay surfaces to life and gives each piece a distinctive appearance.

Flecks + Specks colored grog

Flecks + Specks colored grog is made from colored clay that is fired, crushed and carefully graded by grain size. Like traditional grog, it can help reduce clay shrinkage and cracking while adding decorative color and texture.

It can be used with porcelain, stoneware, earthenware and casting slip. It is suitable for wheel throwing, handbuilding and slab work. The grog can be wedged into the clay, rolled into the surface or pressed individually into soft clay. Sizes S and M can also be added to properly prepared casting slip.

Flecks + Specks grog is available in our shop in three sizes: S – 40 mesh, M – 30 mesh and L – 20 mesh. Finer grains create a subtler, more even effect and a smoother surface, while size L produces a bolder, more organic texture.

To reveal the colored specks more clearly, the surface can be lightly sponged. Transparent glazes are recommended, as opaque glazes, slips and underglazes may cover the grog effect. The product can be fired between 1000°C and approximately 1300°C. Testing is recommended before reduction firing, as some colors may change.

Avoid inhaling dust and use appropriate personal protective equipment when handling the product. Finished pieces may be suitable for food contact when properly covered with a food-safe glaze.

Flecks + Specks Dino Egg colored grog

• Creates multicolored pastel specks and a playful, softly speckled effect.
• Combines lively pastel shades to give ceramics a distinctive, slightly nostalgic character.
• Adds decorative texture and can help reduce clay shrinkage.
• Suitable for porcelain, stoneware, earthenware and casting slip.
• Can be used for wheel throwing, handbuilding and slab work.
• Available sizes: S – 40 mesh, M – 30 mesh and L – 20 mesh.
• Finer grains produce a subtler effect, while larger grains create a bolder texture.
• Looks best under a transparent glaze.
• Firing range: 1000°C to approximately 1300°C.