Flecks + Specks Party colored grog

Flecks + Specks Party colored grog creates warm multicolored specks after firing, giving ceramic surfaces a lively texture and playful speckled effect.

Flecks + Specks Party is a multicolored grog made up mainly of warm shades. When added to a clay body, it creates an energetic mix of colorful specks and a playful, speckled effect. The size and intensity of the specks depend on the selected grain size and the amount of grog used. Every batch of Party is unique, so the color mix and proportions may vary.

Flecks + Specks colored grog

Flecks + Specks colored grog is made from colored clay that is fired, crushed and carefully graded by grain size. Like traditional grog, it can help reduce clay shrinkage and cracking while adding decorative color and texture.

It can be used with porcelain, stoneware, earthenware and casting slip. It is suitable for wheel throwing, handbuilding and slab work. The grog can be wedged into the clay, rolled into the surface or pressed individually into soft clay. Sizes S and M can also be added to properly prepared casting slip.

Flecks + Specks grog is available in our shop in three sizes: S – 40 mesh, M – 30 mesh and L – 20 mesh. Finer grains create a subtler, more even effect and a smoother surface, while size L produces a bolder, more organic texture.

To reveal the colored specks more clearly, the surface can be lightly sponged. Transparent glazes are recommended, as opaque glazes, slips and underglazes may cover the grog effect. The product can be fired between 1000°C and approximately 1300°C. Testing is recommended before reduction firing, as some colors may change.

Avoid inhaling dust and use appropriate personal protective equipment when handling the product. Finished pieces may be suitable for food contact when properly covered with a food-safe glaze.

Flecks + Specks Party colored grog

• Creates multicolored specks dominated by warm shades and a playful, lively effect.
• Every batch is unique and may vary slightly in its color mix and proportions.
• Adds decorative texture and can help reduce clay shrinkage.
• Suitable for porcelain, stoneware, earthenware and casting slip.
• Can be used for wheel throwing, handbuilding and slab work.
• Available sizes: S – 40 mesh, M – 30 mesh and L – 20 mesh.
• Finer grains produce a subtler effect, while larger grains create a bolder texture.
• Looks best under a transparent glaze.
• Firing range: 1000°C to approximately 1300°C.