AMACO DL-60 Honeycomb stoneware glaze

Dipping and Layering Honeycomb is a satin golden-yellow stoneware glaze with darker thick areas, rich texture response and slight movement during firing.

DL-60 Honeycomb produces a satiny golden yellow surface. Thicker applications become darker and more variegated, which helps define relief and modeled texture. The glaze is slightly fluid during firing and can be used as a warm accent or as a base for layering.

AMACO Dipping and Layering glazes

AMACO Dipping & Layering is a range of dry dipping glazes formulated for dipping and pouring. Each bag contains a pre-measured dry blend to be mixed with distilled water. The glazes can be used on their own or layered to create complex color transitions. The palette is inspired by popular AMACO Potter’s Choice glazes. One bag yields approximately 4.7 L of prepared glaze, speeding up application and making it easier to achieve an even coat.

AMACO Dipping and Layering DL-60 Honeycomb stoneware glaze

• Honeycomb fires to a satiny golden yellow with a darker, more varied effect in thicker applications.
• Each bag contains 4.5 kg of dry glaze. Once prepared, it yields the same volume as ten 472 ml jars of ready-mixed glaze, making it an economical option for studios that use larger quantities.
• To prepare the glaze, pour 3.8 L of distilled water into a suitable container, gradually add the powder and mix until the glaze suspension is smooth and free of lumps. For best results, sieve the glaze through an 80-mesh screen and leave it overnight. One bag yields approximately 4.7 L of prepared glaze.
• Apply the glaze to bisqueware by dipping for 1–3 seconds. Stir the glaze suspension thoroughly before each use.
• The recommended firing range is 1200–1240°C.
• The glaze is slightly fluid during firing and can be used as a warm accent or a base beneath other colors.
• Wear a suitable particulate respirator while mixing, work in a well-ventilated area and avoid breathing dust. We recommend firing a test tile before using each new batch and consulting the Safety Data Sheet.