Amaco Dipping and Layering DL-59 Brick Red Stoneware Glaze
Amaco Dipping and Layering DL-59 Brick Red Stoneware Glaze

AMACO DL-59 Brick Red stoneware glaze

Price brutto: Including
544.71 zł
Price netto: Excluding
544.71 zł
Order processing time: 2-4 business days

Dipping and Layering Brick Red is an opaque red stoneware glaze with fine speckles and translucent breaks over raised areas where the coat is thinner.

In stock
AMACO
39817P

Dipping and Layering Brick Red is an opaque red stoneware glaze with fine speckles and translucent breaks over raised areas where the coat is thinner.

DL-59 Brick Red is an opaque, vivid red glaze with fine speckles. It becomes more translucent where thin, creating lighter breaks over edges and raised texture. The color is striking on its own and works well in layered combinations.

AMACO Dipping and Layering glazes

AMACO Dipping & Layering is a range of dry dipping glazes formulated for dipping and pouring. Each bag contains a pre-measured dry blend to be mixed with distilled water. The glazes can be used on their own or layered to create complex color transitions. The palette is inspired by popular AMACO Potter’s Choice glazes. One bag yields approximately 4.7 L of prepared glaze, speeding up application and making it easier to achieve an even coat.

AMACO Dipping and Layering DL-59 Brick Red stoneware glaze
  • Brick Red fires to an opaque, vivid red with fine speckles and translucent breaks where the application is thin.
  • Each bag contains 4.5 kg of dry glaze. Once prepared, it yields the same volume as ten 472 ml jars of ready-mixed glaze, making it an economical option for studios that use larger quantities.
  • To prepare the glaze, pour 3.8 L of distilled water into a suitable container, gradually add the powder and mix until the glaze suspension is smooth and free of lumps. For best results, sieve the glaze through an 80-mesh screen and leave it overnight. One bag yields approximately 4.7 L of prepared glaze.
  • Apply the glaze to bisqueware by dipping for 1–3 seconds. Stir the glaze suspension thoroughly before each use.
  • The recommended firing range is 1200–1240°C.
  • The glaze works well on its own and can also be layered with other Dipping & Layering colors.
  • Wear a suitable particulate respirator while mixing, work in a well-ventilated area and avoid breathing dust. We recommend firing a test tile before using each new batch and consulting the Safety Data Sheet.

Data sheet

Firing temperature
1200-1240°C
Food-safe
yes
Safe when applied with a compressor
no
Hue
Red
Properties
glossy

You might also like