Mayco SC-77 Glo-Worm Ceramic Glaze

Mayco Stroke & Coat SC-77 Glo-Worm gives an intense celadon-green shade at low-fire temperatures. Higher firing causes no clear color change. For details.

Glo-Worm is a dense, highly pigmented glaze from the Stroke & Coat series. At low-fire temperatures, it gives an intense celadon-green shade. At higher firing temperatures, it shows no clear color change. The glaze works well where visible brush strokes, fine details and varied coverage are desired. One coat creates a translucent effect, while two to three coats gradually build opacity and an even, glossy surface without the need for a clear glaze.

Mayco Stroke & Coat glazes are stable, glossy and highly pigmented decorative glazes. When applied in two to three coats, they give vivid, opaque colors. They can be applied to wet clay, low-fire bisque or stoneware bisque and fired across a broad temperature range in oxidation or reduction. Use them for fine details, brush strokes, majolica-style decoration and full surface coverage. To achieve a watercolor-like effect with visible brush marks, thin the glaze with water. The final result depends on the clay body, application thickness, firing process and temperature.

Mayco Stroke & Coat SC-77 Glo-Worm Glaze

• At low-fire temperatures, it gives an intense celadon-green shade.
• After firing at higher temperatures, it shows no clear color change.
• Mayco Stroke & Coat glazes are dense and work well where visible brush strokes, details and varied coverage are desired.
• One coat creates a translucent effect, while two to three coats gradually build opacity.
• Fires to a glossy surface without applying a clear glaze.
• Can be thinned with water to create a watercolor-like effect.